> From https://brixsignage.com/blog/amazon-signage-stick-remote-management/ . All Brix pages as markdown: https://brixsignage.com/llms.txt

# Amazon Signage Stick Remote Management, Explained

What Amazon's Remote Management API lets a CMS do on the Signage Stick, what a CMS without it cannot do, and how to check one in a free trial.

Hardware Published October 5, 2026

Remote management on the Amazon Signage Stick is a set of device controls Amazon builds into the Stick and opens only to approved CMS providers. A CMS that uses it can reboot the Stick, take a real screenshot, turn the TV on and off and change Wi-Fi from its own dashboard.

A CMS that does not use it is an ordinary app on the Stick. It can play your content, but it cannot reach most of those controls.

## What Amazon's Remote Management API is

Amazon calls it the [Amazon Signage Remote Management API](https://signage.amazon.com/remote-management). It is not a cloud service you log in to. It runs on the Stick itself:

-   A system app from Amazon, the Remote Management Agent, is built into every Stick.
-   The CMS app talks to that agent on the device.
-   The agent checks the app's package name and signing key against Amazon's allowlist before it does anything.
-   An app that is not on the list gets "Package not in allowlist" and nothing happens.

Amazon's [developer page](https://signage.amazon.com/api-documentation) says the API is for "approved Amazon Signage Stick CMS providers". The [API guide](https://file.signage.amazon.com/guide/Amazon_Signage_Remote_Management_API.pdf) describes it as letting "certified Content Management System (CMS) applications directly control and monitor Signage Stick devices".

## What it lets a CMS do

From Amazon's API guide (version 1.2.1). Each line is one call the CMS can make:

-   **Restart:** reboot the Stick, with an optional delay of up to 300 seconds. Restart just the CMS app.
-   **Factory reset:** wipe the Stick remotely.
-   **TV power:** turn the TV on or off over HDMI-CEC, and read whether it is on.
-   **Screenshots:** capture what is on the TV, including video. Record up to 20 seconds of the screen.
-   **Rotation:** set landscape, portrait or the reverse of either, for the whole display.
-   **Wi-Fi:** add a network (open, WEP, WPA, WPA2 or WPA3, hidden networks too).
-   **Time zone:** set it, and stop the Stick detecting one by itself.
-   **Health:** CPU and GPU temperature, memory, storage, Wi-Fi signal, IP and MAC address, serial number.
-   **HDMI:** whether a TV is connected, its make and model, and its native resolution.
-   **Updates:** see pending OS and CMS app updates, and ask the Stick to check for them.
-   **Cache:** clear the CMS app's cache.

Amazon limits how often some calls run: one reboot or reset every 5 minutes, and five TV power commands a minute.

Two things are not in the API. Kiosk mode (the Stick always opening your CMS, with no way out to a home screen) is part of the Stick itself, whatever CMS you pick. Amazon's [FAQ](https://signage.amazon.com/support/faq) also says the Stick does not support volume or mute over HDMI-CEC.

## What breaks without it

A CMS without the API still installs from Amazon's setup list and still plays content. What it loses:

-   **No scheduled TV off.** Amazon's own FAQ answer to "Why is my TV not turning off on schedule?" starts with: confirm your CMS has the Remote Management API integrated, "without it, scheduled power commands won't reach the TV."
-   **No reboot from the CMS.** Android lets only a system app or the device's owner restart the device. On the Stick, Amazon's agent is the device owner, so an app has to ask it. Without the API, a frozen screen needs Amazon's own portal or app, or a visit.
-   **Screenshots without the video.** An app can capture its own window, but on the Stick that capture shows video as a black box. Android's other route, screen recording permission, asks for consent on the TV, which nobody answers on a wall screen. Amazon's agent captures the real picture.
-   **Portrait without the video.** An app can turn its own page on its side, but on Fire OS a playing video sits on its own layer and stays landscape. Rotating the whole display needs the agent.
-   **No Wi-Fi change from the office.** Moving a Stick to a new network means a person with the remote at the TV, or Amazon's own tools.

You can still do some of this from Amazon's [Signage Manager](https://console.signage.amazon.com/) portal and the Amazon Signage mobile app, which has a virtual remote. That is a second login, separate from the place you manage content.

## How to check a CMS before you buy

1.  **Look for the label.** Open Amazon's [CMS partner directory](https://signage.amazon.com/cms-partners) and filter by the "Remote Management" capability. A provider without the label does not offer the API's controls in Amazon's view. More than 80 providers are listed; fewer than half carry the label.
2.  **Read the vendor's Signage Stick page.** A vendor that uses the API says so, and lists which controls it uses. Some list reboot and screenshots but not TV power or Wi-Fi. Some offer the controls only on their own hardware, not on the Stick.
3.  **Test it in the trial.** Pair one Stick and try each control from the dashboard:

-   Reboot it. The TV goes black and the Stick comes back on its own.
-   Take a screenshot while a video plays. The video should be in the picture, not a black box.
-   Turn the TV off and on from the dashboard, then set an off schedule for 5 minutes from now.
-   Set the screen to portrait while a video plays. The video should turn too.

1.  **Check the plan.** Some vendors keep screenshots or TV power on a higher plan. Price the plan that has the controls you need.

If the TV does not turn off even with a CMS that has the label, the cause is usually the TV. Check HDMI-CEC is on in the TV's settings and the Stick is plugged straight into the TV. See [HDMI-CEC not working on the Signage Stick](https://brixsignage.com/blog/amazon-signage-stick-hdmi-cec-not-working/).

## A consumer Fire TV Stick has none of this

The Remote Management API runs only on Amazon's signage hardware. A consumer Fire TV Stick runs a signage app as a normal app: no kiosk mode, no allowlisted agent, no remote reboot or TV power from a CMS. See [Fire TV Stick for digital signage](https://brixsignage.com/guides/fire-tv-stick-digital-signage/) for what that means on a real screen.

## Where Brix fits

Brix is in Amazon's CMS directory with the Remote Management label and uses the API on every Signage Stick. From the Brix CMS you can:

-   reboot a Stick;
-   see a live screenshot, video included;
-   turn the TV off outside Screen hours over HDMI-CEC (a new screen runs 6:00 am to 11:00 pm);
-   change the Stick's Wi-Fi network and time zone;
-   rotate the whole display to portrait, video included;
-   watch the Stick's temperature and Wi-Fi network.

Brix does not use the API's factory reset or 20-second screen recording. Proof of play is included and off by default; when a Stick is offline it keeps its play records and sends them when it reconnects.

Brix costs $6 per screen per month billed annually, or $8 billed monthly. See [the best CMS for the Amazon Signage Stick](https://brixsignage.com/blog/best-cms-for-amazon-signage-stick/) for how other providers compare on these controls.

[Start a 7-day Brix trial](https://brixsignage.com/start). No card needed.

Putting Brix on a Stick? See [Amazon Signage Stick software](https://brixsignage.com/amazon-signage-stick/): the price, the four setup steps and what Brix controls on the Stick.
