> From https://brixsignage.com/blog/see-whats-on-an-amazon-signage-stick-screen-remotely/ . All Brix pages as markdown: https://brixsignage.com/llms.txt

# See What an Amazon Signage Stick Shows Remotely

Check what an Amazon Signage Stick is showing without a visit: screen captures through your CMS, and what a capture cannot tell you about the TV.

Hardware Published September 30, 2026

To see what an Amazon Signage Stick is showing from anywhere, use a signage CMS that supports Amazon's Remote Management API. It can take a screen capture from the stick and show it in your dashboard. Amazon's API can capture a still picture or record a short video of up to 20 seconds. What your CMS does with that, a single screenshot or a picture that refreshes on its own, varies by vendor. [Which CMS offers screenshots on the Stick](https://brixsignage.com/blog/best-cms-for-amazon-signage-stick/) compares them.

## Ways to check a screen without going there

| Method | What you get | Limits |
| --- | --- | --- |
| Screen capture from the CMS | A picture of exactly what the stick outputs | The stick must be online. Shows the stick's output, not the TV |
| Short video capture from the CMS | Up to 20 seconds of playback, where the CMS offers it | Same as above |
| Proof-of-play reports | A log of what played and when | Tells you what played, not what it looked like |
| Someone at the site with a phone | A photo of the real TV | Needs a person, and it is a one-off |

A capture is taken inside the stick, before the picture reaches the TV. It shows the right content even when the TV is off, on another input, or has a cracked panel. To know the TV itself is showing it, you also need the TV's state, which a stick can read over HDMI-CEC on TVs that support it.

## What to check when the picture looks wrong

-   **Old content.** The stick may be offline and playing its saved copy. Check its connection status in your CMS.
-   **A black or blank capture.** The item on screen may still be loading, or it may be a web page that did not load.
-   **Stretched or cropped content.** The file is the wrong shape for the screen. Check the screen's orientation and the content's size.
-   **A capture that looks right, but staff say the TV is dark.** The TV is off, on another input, or broken. See [No Signal or wrong input](https://brixsignage.com/blog/amazon-signage-stick-no-signal-wrong-input/).

## Where Brix fits

Brix shows a live picture of each Signage Stick, not just a screenshot on request. Open the screen from the **Screens** list. The picture sits at the top of the panel, with a **LIVE** badge while fresh frames arrive.

While the panel is open, Brix asks the stick for a new picture on a timer that slows the longer you leave it open:

| Panel open for | New picture every |
| --- | --- |
| First 2 minutes | 5 seconds |
| 2 to 5 minutes | 15 seconds |
| 5 to 15 minutes | 1 minute |
| Over 15 minutes | 5 minutes |

Close and reopen the panel to go back to every 5 seconds. Captures pause while the browser tab is hidden. It is a series of still pictures, not a video stream.

-   **Bigger view:** select **Mirror live** from the panel's three-dot menu.
-   **Many screens at once:** switch the Screens list to **Grid view** to see each screen's last picture side by side. Grid view does not refresh every few seconds.
-   **The TV, not only the stick:** on a TV with HDMI-CEC, the screen's row reads **TV off** or **TV on another input** when the TV is not showing the stick.
-   **Offline screens** show their last picture and how long ago it was taken.

A screen running Brix in a browser tab cannot capture itself, so it shows no live picture. Run the screen on a Signage Stick, a Windows player or an Android player for live pictures.

## FAQ

### Do I need anything installed at the location?

No. The capture travels from the stick to the CMS over the internet. Nothing else is needed at the site.

[Start a free trial](https://brixsignage.com/start) and open a paired stick to see its live picture. Setup is in the [Signage Stick guide](https://brixsignage.com/guides/hardware-amazon-signage-stick/).

Putting Brix on a Stick? See [Amazon Signage Stick software](https://brixsignage.com/amazon-signage-stick/): the price, the four setup steps and what Brix controls on the Stick.
