> From https://brixsignage.com/guides/schedules/ . All Brix pages as markdown: https://brixsignage.com/llms.txt

# How to Schedule Digital Signage by Time of Day

Schedule digital signage content by time of day (dayparting): breakfast, lunch and evening loops, weekend content, date ranges and screens off.

Core Features 8 sections Updated January 12, 2026

To schedule digital signage content, divide the week into time blocks (dayparts) and give each block its own playlist: for example a breakfast menu from 6:00 to 10:30, lunch from 10:30 to 4:00 and dinner after that. Then set what plays in the gaps, and assign the schedule to your screens. Good scheduling software also lets a block run only between two dates (a holiday promotion) and turns the screens off when you are closed.

In Brix, go to **Schedules** under **Content**, select **New**, then draw a block on the weekly grid for each daypart and choose what it plays. To put a finished schedule on a screen, read [put content on a screen](https://brixsignage.com/guides/put-content-on-a-screen/).

## Plan the dayparts first

Write the plan down before you open the grid:

| Daypart | Days | Time | Plays |
| --- | --- | --- | --- |
| Breakfast | Mon to Fri | 6:00 to 10:30 | Breakfast menu playlist |
| Lunch | Every day | 10:30 to 16:00 | Lunch menu playlist |
| Weekend brunch | Sat, Sun | 8:00 to 12:00 | Brunch playlist (priority 1, so it wins over Lunch) |
| Late night | Fri, Sat | 22:00 to 02:00 | Late-night playlist |
| Fallback | Any gap |  | Brand loop |

Each row becomes one block. Build the loop each block plays first: read [playlists](https://brixsignage.com/guides/playlists/).

## Create a schedule

1.  Select **Schedules** in the sidebar and select **New** at the top of the rail.
2.  Select the name **New Schedule** in the editor header, type a name and press Enter.

![The Schedules page, with the rail of schedules on the left, the weekly grid, and the Blocks list.](https://brixsignage.com/images/screenshots/schedules-page.png)

The Schedules page, with the rail of schedules on the left, the weekly grid, and the Blocks list.

There is no Save button: the editor saves every change as you make it.

## Add a time block (daypart)

A block is one daypart with its days, start time, end time and one item of content.

1.  Press on the first hour cell in a day column and drag down to the last hour. Release to open the **New block** sheet. (If the grid hides the hours you need, select the quiet hours strip first.) Or select **Add block** beside the **Blocks** heading.
2.  Type a **Label** such as Morning, Lunch or After School.
3.  Select a day button for each day the block runs.
4.  Set **Start time** and **End time**. Type 930 or 9pm, or pick a quarter hour.
5.  Choose the item under **Content**: Media, Apps, Playlists, Layouts or Templates.
6.  Select **Add block**. It stays disabled until the block has a label, a day and two different times. A block you never save disappears when you dismiss the sheet.

![The block editor sheet, with Label, Days, Start time, End time, Content, Priority, Active dates and Repeat.](https://brixsignage.com/images/screenshots/schedules-block-editor.png)

The block editor sheet, with Label, Days, Start time, End time, Content, Priority, Active dates and Repeat.

To edit a block, select it in the grid or use the pencil in the **Blocks** list. To remove one, use the trash icon and **Undo** in the snackbar within 8 seconds.

**Past midnight:** set the end time earlier than the start, for example 22:00 to 02:00. An end of 00:00 means midnight.

**Turn the screens off:** tick **Turn the screens off** on a block. It plays nothing and raises the same display power signal as a screen's opening hours; read [screen settings and display power](https://brixsignage.com/guides/screen-settings-and-display-power/).

**Date range:** under **Active dates** pick a start and end date. **Repeat** (for example **Every other week**) needs a start date.

**Overlaps:** two blocks over the same minutes take turns on screen, and an amber banner names the first overlapping pair. Type a **Priority** above 0 on the block that should play alone.

## Copy one day onto the rest of the week

1.  Point at a day column header that has blocks and select the copy icon.
2.  Select each target day.
3.  Select the **Copy to** button.

![The copy-day dialog, with the seven day buttons and the warning that the copy replaces the blocks on those days.](https://brixsignage.com/images/screenshots/schedules-copy-day-dialog.png)

The copy-day dialog, with the seven day buttons and the warning that the copy replaces the blocks on those days.

A copy replaces the blocks on every target day.

## Choose what plays between blocks, or turn screens off

1.  Select the **When nothing's on** row to expand it.
2.  Select **Play something** and choose a **Fallback content** item.

Without fallback content, a screen shows a blank "Ready for content" frame in every uncovered minute, and Brix blocks approval. Select **Turn the screens off** in the same row to power the displays down between blocks instead.

## Set the time zone and the run dates

1.  Select the **Runs** row to expand it.
2.  Under **Clock**, choose **Each screen's local time** (a 9 AM block starts at 9 AM in every time zone) or **Workspace time (all together)**.
3.  Set **Starts** (default Today) and **Expires** (default Never).

Before the start date and after the expiry date, the schedule does not drive its screens, which fall through to their next assignment.

## Send a schedule for review

Where the schedule's location needs a review, select **Request approval**, choose the location under **Where is this being published?**, type a note and select **Send for approval**. Set the fallback content first, or the button stays disabled.

## Delete a schedule

Tick the checkbox at the left of a row in the rail (hold Shift for a run), select **Delete** in the bar at the bottom and confirm. Screens on a deleted schedule fall back to the workspace default. Brix keeps it in the recycle bin for 30 days.

To split one screen into zones, read [layouts](https://brixsignage.com/guides/layouts/). To build the loop a block plays, read [playlists](https://brixsignage.com/guides/playlists/).
