> From https://brixsignage.com/guides/screen-settings-and-display-power/ . All Brix pages as markdown: https://brixsignage.com/llms.txt

# Turn Signage TVs Off at Night: Screen Hours

Schedule when a digital signage TV turns on and off over HDMI-CEC, for one screen or a whole fleet, plus volume, input lock and PIN lock.

Core Features 9 sections Updated September 28, 2026

A digital signage TV turns itself off at night when the media player sends it an HDMI-CEC standby command at closing time and a wake command at opening time. That needs three things:

-   A player that speaks HDMI-CEC.
-   A TV with CEC switched on in its settings (Samsung calls it Anynet+, LG SimpLink, Sony Bravia Sync, Philips EasyLink).
-   An on/off schedule in the signage software.

Without CEC, the software can only blank the picture, and the TV's own sleep or on/off timer has to switch it off.

In Brix, a new screen starts on **Standard hours**: on from 6:00 am to 11:00 pm, off overnight. To change it, open the screen panel on the **Screens** page and expand **On and off times**. The same panel holds the time zone, volume, input lock and PIN lock. To turn a screen to portrait, follow [Amazon Signage Stick portrait mode](https://brixsignage.com/guides/amazon-signage-stick-portrait-mode/).

## Set the on and off times for one screen

1.  Open the screen panel.
2.  Expand **On and off times**.
3.  Under **Schedule source** choose **Custom hours**, or pick a power policy.
4.  Under **On / off schedule** choose **Standard hours** (6:00 am to 11:00 pm, every day), **Always on** or **Custom per-day hours…**.
5.  For custom hours, give each of the seven days an opening time and a closing time. Select **Copy to all** on a row to use its times every day.
6.  On a screen without HDMI-CEC, choose under **When this screen is closed** what the screen does after closing time.

![The On and off times section with the schedule source and the day windows.](https://brixsignage.com/images/screenshots/screens-settings-hours.png)

The On and off times section with the schedule source and the day windows.

A new screen starts on **Standard hours**, so it turns off from 11:00 pm to 6:00 am. For a site that is open all night, select **Keep it on 24/7** beside that line to switch to **Always on**.

The choices after closing are **Let the screen sleep (default)**, **Keep the screen awake** and **Use the device's own power settings**. On a screen with HDMI-CEC the TV turns off at closing time and this field does not appear. Without HDMI-CEC, Brix cannot switch the TV's power, so out of hours the picture goes blank; the setting only decides whether the display may sleep behind it. With **Always on** the field becomes **Screen power**, offering **Keep the screen awake (default)** and **Use the device's own power settings**. A power policy hides the per-screen hours editor: one of the two drives the schedule.

If a Stick turns the TV off when it should not, read [Amazon Signage Stick keeps turning off](https://brixsignage.com/guides/amazon-signage-stick-keeps-turning-off/). If the TV ignores the schedule, check that CEC is on in the TV's settings: read [HDMI-CEC not working on the Amazon Signage Stick](https://brixsignage.com/blog/amazon-signage-stick-hdmi-cec-not-working/).

## Turn the TV on or off now, remotely

1.  Open the screen panel and expand **On and off times**.
2.  Select **Screen on** or **Screen off** under the schedule controls.

The buttons appear only on a device that speaks HDMI-CEC. The TV does not always confirm these commands, so check the screen.

## Set on and off times for many screens at once

1.  Open **Screens** and switch to list view.
2.  Tick the checkbox on every screen you want.
3.  Select **Operating hours** in the black action bar.
4.  Choose an option under **When on** and under **Outside those hours**.
5.  Select **Apply to n screens**.

Bulk changes need list view. See [manage your screens](https://brixsignage.com/guides/manage-your-screens/).

## Use one schedule for a whole fleet (power policies)

A power policy is one set of opening hours you write once and apply to many screens.

1.  Open **Settings** > **Organization**, then **Power policies**.
2.  Select **New policy** and type a name such as Store hours.
3.  Switch on each day the screens must run and give every open day an opening and a closing time. A day left off keeps the display dark all day.
4.  Switch on **Reboot the device once a day** for a nightly restart, and pick the hour.
5.  Choose **Each screen's own time zone** or **A fixed time zone** (pick the zone in the list).
6.  Select **Save**.

![The New power policy dialog with the weekday rows, the daily reboot and the time-zone choice.](https://brixsignage.com/images/screenshots/org-power-policy-dialog.png)

The New power policy dialog with the weekday rows, the daily reboot and the time-zone choice.

You apply a policy from a screen's **On and off times** section or the bulk action bar. When you delete a policy, its screens fall back to their own hours.

## Set the time zone and location

1.  Open the screen panel and expand **About this screen**.
2.  Pick a zone under **Time zone**, or leave **Inherit from location**.
3.  Select **Set location**, type a city name, select the suggestion and select **Save location**.
4.  Type comma-separated words into **Tags**, and pick a place under **Location**.

Opening hours and the daily refresh run in the screen's own local time. Weather and the other location-aware apps read the location you set here.

## Set the volume for one screen

1.  Open the screen panel and expand **Picture and sound**.
2.  Drag the **Volume** slider and release it to save.

A workspace-wide mute beats this slider. Clear **Mute everything** in **Settings** > **Workspace** to get the sound back.

## Stop staff changing the volume or the input

Staff sometimes mute a TV with its own remote, or switch it to another input, and the screen looks healthy in the CMS while nobody sees or hears it. Two switches under **Picture and sound** undo that:

-   **Stop the TV remote changing the volume**: if someone turns the sound down or mutes it with the TV remote, the screen puts it back.
-   **Keep the TV on this input**: if someone switches the TV to another input, the screen switches it back. Choose how often it checks under **Check every**.

Each switch appears only on a device that reports volume or input control.

![Picture and sound on a Signage Stick: the volume slider and the two lock switches.](https://brixsignage.com/images/screenshots/screens-panel-picture-sound.png)

Picture and sound on a Signage Stick: the volume slider and the two lock switches.

## Lock a screen with a PIN

1.  Open the screen panel and expand **Lock this screen**.
2.  Turn on **Lock this screen**.
3.  Choose **Workspace PIN** or **Custom for this screen**.
4.  Type a PIN of 4 to 8 digits and select **Save**.
5.  Set **Return to content after** in seconds (10 to 600).
6.  Select **Reveal** under **Recovery code** and store the code somewhere safe.

Brix never shows the current PIN again. Every screen set to **Workspace PIN** shares one code, so a change reaches them all. With no PIN set, the screen opens only with its recovery code or a remote unlock. **Rotate** issues a new recovery code and the old one stops at once.

To let a technician in on site, select **Unlock now (10 min)** under **Lock this screen**. If the screen is offline, Brix runs the unlock when it reconnects.

When a screen ignores a setting you saved here, read [troubleshoot a screen](https://brixsignage.com/guides/troubleshoot-a-screen/).

## When Brix cannot switch the TV off

A browser-tab screen, the Windows player and any other player without HDMI-CEC cannot switch the TV's power. Outside the hours the picture goes blank, and the TV stays on. For those screens, use the display's own on/off timer, or run the screen on a Signage Stick or another CEC-capable player.
