> From https://brixsignage.com/guides/troubleshoot-a-screen/ . All Brix pages as markdown: https://brixsignage.com/llms.txt

# Digital Signage Screen Blank or Offline: Fixes

Why a digital signage screen goes blank, offline or shows old content, and how to fix each cause, from TV input to network to a full player.

How-To 6 sections Updated September 28, 2026

A digital signage screen that is blank, offline or stuck on old content almost always has one of six causes: the TV is off or on the wrong input, the HDMI cable or port has failed, the media player has lost power, the player has lost the network, nothing is scheduled to play, or the player's storage is full so new content cannot download. Work from the TV back: check TV power and input with the TV remote, reseat the HDMI cable, unplug the player for 10 seconds, then check the network. A player that has lost the network usually keeps playing what it saved, so "offline" and "blank" are often two different problems.

Your signage software tells you which one you have. In Brix, go to **Screens**, select the screen and read the **Connection** row: **Live**, **Slow updates** or **Offline**. Then find your symptom below. A screen that never paired needs [connect a screen](https://brixsignage.com/guides/connect-a-screen/) instead.

## Digital signage screen offline

**Cause:** Brix heard nothing from the screen for ten minutes or more. The picture on the glass probably stays as it was; the screen only gets nothing new.

**Fix:**

1.  Expand **Connection** and read the **Last heartbeat** line.
2.  Select **What might be wrong?** and work down the **Check, in order** list at the TV, starting with TV power and the input source. The list is a guided guess: Brix cannot see the TV, the cable or the input.
3.  Check the network the screen uses in the **Wi-Fi** or Ethernet block of the **Player** row.
4.  If the TV keeps switching off, read [Amazon Signage Stick keeps turning off](https://brixsignage.com/guides/amazon-signage-stick-keeps-turning-off/) and check the screen's on and off times in [screen hours and display power](https://brixsignage.com/guides/screen-settings-and-display-power/).

![An offline screen's Connection section, with the last heartbeat and What might be wrong.](https://brixsignage.com/images/screenshots/screens-panel-offline-diagnose.png)

An offline screen's Connection section, with the last heartbeat and What might be wrong.

**Slow updates** is milder: the live connection is closed, but the screen still checks in every 5 minutes and saved content keeps playing. A change can take a few minutes to arrive. It usually fixes itself; if it does not, the venue internet is slow or unstable.

A player that loses the network keeps playing the content it saved. For how long and what it needs, read [Amazon Signage Stick offline playback](https://brixsignage.com/blog/amazon-signage-stick-offline-playback/).

## Digital signage screen blank or black

**Cause:** Usually power, the HDMI input or the display. **Possibly frozen** and **May be blank** come from picture sampling, so treat each as a hint.

**Fix:**

1.  Run the **What might be wrong?** list above.
2.  A Signage Stick stuck on the Amazon logo, or a black screen: [Amazon Signage Stick stuck on logo or black screen](https://brixsignage.com/guides/amazon-signage-stick-stuck-on-amazon-logo/). For any other symptom on a Stick, match it in [Amazon Signage Stick not working](https://brixsignage.com/guides/amazon-signage-stick-not-working/).
3.  Still stuck: [factory reset an Amazon Signage Stick](https://brixsignage.com/guides/amazon-signage-stick-factory-reset/), then pair it again.
4.  A screen showing the **Ready for content** splash has nothing assigned: read [put content on a screen](https://brixsignage.com/guides/put-content-on-a-screen/).

## Screen shows old content or does not update

**Cause:** The screen plays something other than what you expect, or it has not downloaded the new content.

**Fix:**

1.  Expand **Playing now** and read the **Decision chain** from the top. The highlighted step is one of: deactivated, emergency, cast or scheduled.
2.  Expand the **Player** row and find **Content storage**. Scan **Cached assets** for an item marked **Missing**.
3.  Select **Download again** to make the screen fetch everything again. **Clear cache** removes every local copy first, and the screen can show its splash while it downloads.
4.  Under **Updates**, select **Update now** if the row shows a pending **Player app** version. The button appears only for a pending player app update.

A **Storage** row in the **Connection** detail reading **Critical** (less than 5% or 250 MB free) means the player has stopped downloading new content. **Low** (less than 20% or 1 GB free) means it has paused downloading emergency content. Clear the cache, remove content, or replace the device.

## Picture sideways or upside down

**Cause:** The screen's rotation does not match how the TV is mounted.

**Fix:** Follow [Amazon Signage Stick portrait mode, even upside down](https://brixsignage.com/guides/amazon-signage-stick-portrait-mode/). It sets portrait, and portrait flipped, from one screen in the CMS.

## See what the screen shows from the office

-   **Live:** open the screen panel, select the **…** button beside **Cast** and choose **Mirror live**. Wait for **Live** in the header. Without a peer-to-peer video path it falls back to about 2 frames per second and reads **Live · preview**.
-   **A still:** select **See this screen's history**, then **Capture now** in **Captured frames**. A browser screen shows no captured frames.

## Contact support

1.  Select the **ID** pill at the top of the panel to copy the screen ID.
2.  Select **See this screen's history**, then **Copy diagnostics**.
3.  Paste both into your support ticket. **Player logs** cover a rolling 24 hours only.

To act on a whole fleet, read [manage your screens](https://brixsignage.com/guides/manage-your-screens/). For alerts when a screen drops, read [alerts and emergencies](https://brixsignage.com/guides/alerts-and-emergencies/).
