Blog / Hardware / Does the Amazon Signage Stick Play 4K Video?

Does the Amazon Signage Stick Play 4K Video?

The Amazon Signage Stick decodes 4K video in hardware; here is what resolution, frame rate and format work smoothly.

Hardware
On this page
  1. What the Fire Stick's chip actually decodes
  2. Formats that need no conversion
  3. Why a screen still shows 1080p on 4K-capable hardware
  4. Where Brix fits
  5. FAQ

Yes. The Amazon Signage Stick's chip decodes 4K video in hardware, up to 3840×2160 at 60 frames a second. Buyers often call it "the Fire Stick"; Amazon's own name for the device is the Signage Stick. The chip is rarely what holds a screen back. The file you upload usually is.

What the Fire Stick's chip actually decodes

Testing on real units found:

  • Smooth 4K at 30 frames a second (3840×2160).
  • Smooth 4K at 60 frames a second too, on a benchmarked unit.
  • H.264, HEVC, VP9 and AV1 all decode in hardware at 4K.
  • The TV must accept a 4K (2160p) signal over HDMI. On a 1080p TV, you get 1080p.
  • Two 4K videos can play at once on one screen. A third does not fit in memory, so Brix shows that video's still frame instead.

"Smooth" means 5% or fewer dropped frames. A few dropped frames are invisible; more than that is visible stutter.

A device marketed as "4K" is not proof it plays 4K smoothly. The Walmart Onn streaming box also says "4K" on the box. Real-hardware testing benchmarked it at 1080p, not 4K. Check a device's measured playback, not the word on the box.

Formats that need no conversion

  • Container: MP4. A .mov export often carries a codec, such as ProRes, that needs converting anyway.
  • Codec: H.264, HEVC (H.265), VP9 or AV1.
  • H.264 profile: Baseline, Main, Extended or High. A "maximum quality" export from Premiere or DaVinci (High 10, 4:2:2 or 4:4:4) is valid H.264 that a cheap hardware decoder refuses outright. If a file will not play, re-export it at a standard profile.

Any other codec, such as ProRes, MPEG-2 or WMV, needs converting to one of the above before this chip can decode it.

Why a screen still shows 1080p on 4K-capable hardware

Even on hardware that decodes 4K cleanly, some signage software caps every video at 1080p anyway, for three reasons:

  • A 4K file is three to four times the size to store and download on a device with limited storage.
  • A 4K file at 60 frames a second can strain a "4K" media box, even one whose chip supports it on paper.
  • Most viewers stand far enough from a screen that 4K adds no visible detail over a clean 1080p file.

So "does the hardware play 4K" and "does the software send it 4K" are two different questions. The chip answers the first one. The software you run answers the second.

Where Brix fits

Brix costs $6 per screen a month billed annually, or $8 billed monthly, with a 7-day free trial and no card needed.

Brix benchmarked the Signage Stick and confirmed its chip plays 4K at 60 frames a second. Brix sends its own 4K copy (2160p, 30 frames a second, HEVC), not the file you uploaded. A video gets the 4K copy when it is landscape, sharper than 1080p, 3 minutes long or shorter, and fills more than half of a screen at least 2560 pixels along its long edge. Every other video plays a 1080p copy, so a video that does not qualify for 4K still plays.

Upload any format. Brix converts it to a file every screen plays smoothly, so you never have to re-export a video by hand.

Start a free trial and upload a 4K file to see what your own screen gets. See the Amazon Signage Stick page for its other specs, and check how much storage it really has before you plan a 4K library.

FAQ

Does the Amazon Signage Stick support 4K video?

Yes. Its chip decodes 4K H.264, HEVC, VP9 and AV1 in hardware, including 60 frames a second on a benchmarked unit. The TV must accept 4K over HDMI.

What video format gives the smoothest result?

MP4 with H.264 video, a standard profile (not High 10, 4:2:2 or 4:4:4), and 4K at 30 frames a second or 1080p at up to 60.

Does every screen running this stick actually show 4K?

Only if the software sends it. Some signage platforms cap video at 1080p by default to save storage and bandwidth. Check what your software actually serves, not what the hardware can decode.

Brix runs on the Amazon Signage Stick

Set up in about 10 minutes. Try it free for 7 days, no card needed.

Start free trial

Rolling out 30 or more screens? Amazon gives you a free Signage Stick to test Brix. We arrange it. Talk to us