Blog / Hardware / Amazon Signage Stick: Hotel Guest Wi-Fi Login Page

Amazon Signage Stick: Hotel Guest Wi-Fi Login Page

With Brix, the Amazon Signage Stick opens a hotel or guest Wi-Fi login page on the TV, and a person completes it with the Stick's remote.

Hardware
On this page
  1. What happens on Wi-Fi with a login page
  2. What to ask the venue before you install
  3. When guest Wi-Fi is the wrong network
  4. Sign in to hotel or guest Wi-Fi: the steps
  5. What if the login page does not open?
  6. Where Brix fits
  7. FAQ

Yes. With Brix, the Amazon Signage Stick (the "Fire Stick" behind a business TV) opens a hotel or guest Wi-Fi login page on the TV by itself. A person at the screen completes the page with the Stick's remote, and the screen goes online.

The network asks for the page again each time its sign-in expires, and a person must complete it each time. For a screen that nobody attends, ask the venue for a different network. The questions are below.

What happens on Wi-Fi with a login page

A guest network with a login page (a captive portal) lets the Stick join the Wi-Fi. Then it blocks the internet until someone completes a web page: a room number, a voucher code or a terms checkbox.

With the current version of the Brix app on the Stick:

  • The login page opens on the TV. Brix shows it when the Stick detects a login page on its network.
  • You complete it with the Stick's remote. The Back button closes the page.
  • The page closes by itself when the network gives the Stick internet access.
  • The page closes after 4 minutes, complete or not. The TV does not show a web page all night.
  • The page is upright on a portrait screen. See portrait mode on the Signage Stick.
  • Stored content plays while the Stick is offline. The login page covers the content only while the page is open. See offline playback.

Brix does the same on a Fire TV and on an Android box such as the Walmart Onn.

What to ask the venue before you install

A guest network is made for a phone that stays a few hours. A screen stays for months. Ask the venue:

  • Does the guest sign-in expire, and after how long? Each time it expires, the Stick goes offline and the login page opens on the TV again. The screen stays offline until someone completes the page.
  • Is there a network for fixed equipment, such as tills, card readers or TVs, with a password and no login page?
  • Can the venue allow the Stick by its Wi-Fi MAC address, so that the network does not ask it to sign in? The venue's IT contact decides this. On the Stick, the address is under Settings > About Device > Device Wi-Fi MAC address.
  • Is there a wired port behind the TV? The Stick has no Ethernet port. It takes Amazon's micro-USB Ethernet Adapter, $14.99. Power the adapter from the wall, not from the TV's USB port. See Ethernet on the Signage Stick.

When guest Wi-Fi is the wrong network

Do not use a network with a login page for a screen that must stay online for months with nobody near it. Use the venue's fixed-equipment network, a MAC address exception or a wired connection. The Signage Stick network requirements list what the venue's IT contact must allow.

Guest Wi-Fi with a login page fits an install where a person is on site: an event, a pop-up shop, a trade show stand.

Sign in to hotel or guest Wi-Fi: the steps

Do these steps with a person at the screen, and keep the Stick's remote there.

  1. Set the Stick up on a network with a password. A phone hotspot works. During the Stick's own on-screen setup, pick "Brix Signage". Setup takes about 10 minutes.
  2. Pair the screen in the CMS: Screens > Add screen > Pair a hardware device.
  3. In the CMS, open the screen. In its settings, find Wi-Fi and select Change Wi-Fi.
  4. Enter the guest network's name. For Security, select No password if the network has a login page and no password. Select Save on this screen.
  5. The Stick joins the guest network, and Brix opens the login page on the TV.
  6. Complete the page with the remote. The page closes, and the screen shows as online in the CMS.

You can also change the network at the screen. Press the Settings button on the Stick's remote, then select Network & Internet > Wi-Fi and the guest network. These are the steps in Amazon's FAQ.

If nobody completes the page in 4 minutes, it closes and the screen stays offline. The page opens again when the Stick's connection changes. To make that happen, restart the Stick: unplug its power, then plug it back in.

What if the login page does not open?

Brix opens the page only when the Stick detects a login page on the network. If the Stick is on the guest Wi-Fi, the screen shows as offline and no page opens:

  1. Restart the Stick: unplug its power, then plug it back in. Brix checks the network again when it starts.
  2. If the page still does not open, move the Stick to a network without a login page. Press the Settings button on the remote, then select Network & Internet > Wi-Fi.

For other causes, see why a Signage Stick keeps disconnecting.

Where Brix fits

Brix costs $6 per screen per month billed annually, or $8 billed monthly. The 7-day free trial needs no card, so you can test a Stick on the venue's network before you install the rest. Start a trial.

FAQ

What if the guest Wi-Fi asks only for a password?

That is an ordinary Wi-Fi network, not a login page. Join it during the Stick's own setup, or change the Wi-Fi from the CMS later.

What if the guest Wi-Fi has no password and no login page?

That is an open network. See open Wi-Fi with no password on the Signage Stick.

Brix runs on the Amazon Signage Stick

Set up in about 10 minutes. Try it free for 7 days, no card needed.

Start free trial

Rolling out 30 or more screens? Amazon gives you a free Signage Stick to test Brix. We arrange it. Talk to us