Blog / Buyer's Guides / Free Raspberry Pi Digital Signage: 7 Real Options

Free Raspberry Pi Digital Signage: 7 Real Options

Free and open-source Raspberry Pi digital signage compared: Anthias, piSignage, Yodeck, info-beamer and more, with the limits of each and what a Pi needs.

Buyer's Guides
On this page
  1. Free Raspberry Pi signage software compared
  2. Which one should you pick?
  3. Can a Raspberry Pi run an advertising display?
  4. How to set up Anthias (the fully free route)
  5. Which Raspberry Pi to buy
  6. What else a Pi build needs
  7. What goes wrong on a real install
  8. Where Brix fits

Yes, a Raspberry Pi can run digital signage for free. Anthias (formerly Screenly OSE) is free and open source on any number of Pis, but each screen has its own dashboard. piSignage is free for 2 screens, DigitalSignage.com and OptiSigns for 3, and Yodeck and info-beamer for 1, all managed from one web account.

The software can be free. The Pi is not: the Raspberry Pi 4 board starts at $35, and you add a power supply, a case, a microSD card and a micro-HDMI cable.

Free Raspberry Pi signage software compared

From each vendor's own pages:

SoftwareFree forThe catchAfter the free screens
Anthias (open source)Any number of screensOne dashboard per Pi: no central management. Community support only.Free. Screenly is the paid cloud version.
piSignage2 screens, no time limitPaid screens beyond 2$35 for a new player's first year, then $20 a year
DigitalSignage.com3 screensInstalled by script on Raspberry Pi OS (64-bit)From $3 per screen per month
OptiSigns3 screensOptiSigns logo on screen, 1 GB storage, no schedules$9 per screen per month billed annually, $10 monthly
Yodeck1 screenOne screen only. Pi 5 runs a beta image.$8 per screen per month
info-beamer1 device (new accounts)Pi only; prices in euros€7.75 per device per month (€0.25 a day)
Raspberry Digital SignageAny number of screensA free operating system that shows one web page full screen, not a playlist managerFree (GPL)

Xibo is missing on purpose: its own FAQ says no Raspberry Pi model can run a Xibo player. Its Linux player needs a 64-bit Intel or AMD PC.

Which one should you pick?

  • One or two screens, someone technical on site: Anthias. Fully free, no account, plays images, videos and web pages on a schedule from local storage.
  • Several screens managed from one place, still free: piSignage (2 screens) or DigitalSignage.com (3). Anthias makes you open each Pi's dashboard separately.
  • Already use Yodeck, or want its editor: Yodeck Free on one Pi 4.
  • A dashboard or web page, nothing else: Raspberry Digital Signage. It boots straight into a full-screen browser locked to one address.
  • Customer-facing screens: avoid OptiSigns Free. Its logo stays on screen and it has no schedules.

Can a Raspberry Pi run an advertising display?

Yes, with a playlist tool such as Anthias: images and video play on a loop, and each item can carry its own schedule. OptiSigns Free has no schedules, and Raspberry Digital Signage shows one web page, not a playlist, so neither can day-part an ad.

  • Scheduling: Anthias lets you set a date range, the days of the week and a daily time window for each item. A lunch special can run only from 11:30 am to 2:00 pm. A one-day sale can play on that day only.
  • What size do the ads need to be? Anthias recommends 1080p: 1920x1080 landscape, or 1080x1920 with the screen rotated to portrait. Keep video clips to about 10 to 15 seconds, and keep the offer away from the screen edge; some TVs still overscan. Real 4K source video drops frames on a Pi 4; a Pi 5 can drive a 4K display.
  • Turn the TV off at night: Anthias' Display schedule (off by default) can power the screen down outside business hours. A TV with HDMI-CEC powers down; most computer monitors ignore HDMI-CEC and only go black.

More on day-parting a promotion: in-store promotions on digital signage.

How to set up Anthias (the fully free route)

  1. Install Raspberry Pi Imager on a computer.
  2. Choose Other specific-purpose OS > Digital signage and kiosks > Anthias, then your Pi model (Pi 2 to Pi 5).
  3. Before you write the card, open OS customisation (the gear icon) and turn on SSH. The Anthias image has SSH off, and you need it to change Wi-Fi later.
  4. Write the card, put it in the Pi, connect the TV and power it on. It boots into Anthias.
  5. On first boot the TV shows the Pi's IP address and a QR code. On a computer or phone on the same network, open http://<the Pi's IP address> and add your images, videos and web pages.

An Anthias card written with Raspberry Pi Imager updates itself over the air. Anthias needs the internet only to install and to show web pages: uploaded files play from the Pi's own storage.

Which Raspberry Pi to buy

  • Raspberry Pi 4: the safe choice. Anthias recommends it; Yodeck recommends the 8 GB model and fully supports 4 GB. Board from $35.
  • Raspberry Pi 5: faster, and Anthias recommends it. Yodeck runs it on a beta image. The 16 GB model has far more memory than signage needs.
  • Raspberry Pi 3 B or B+: works with Anthias and Yodeck, but Yodeck plays no 4K on it.
  • Raspberry Pi Zero 2 W: piSignage supports it. Yodeck and Anthias do not. Anthias' maintainer says it keeps the Zero 2 W off its supported boards because its Docker stack competes for disk access at startup on that board.

Video format matters on a Pi. The Pi 5 decodes only HEVC (H.265) in hardware, up to 4K at 60 fps. The Pi 4 decodes H.264 in hardware up to 1080p and H.265 up to 4K. For 4K on either board, export your videos as H.265.

What else a Pi build needs

  • Power supply: 15 W USB-C for a Pi 4. 27 W (5 V, 5 A) for a Pi 5. A weak supply causes random restarts.
  • Case: the Pi 4 case does not fit a Pi 5. The Pi 5 runs best with active cooling, and its official case has a fan.
  • microSD card: For a Pi 4, Yodeck asks for Class 10, 8 GB minimum, 16 GB recommended. For a Pi 5 it asks for 16 GB minimum, 32 GB recommended.
  • Micro-HDMI to HDMI cable: the Pi 4 and Pi 5 have micro-HDMI ports, so a normal HDMI cable does not fit.

What goes wrong on a real install

  • The microSD card wears out. Constant writes kill cheap cards. Buy a good card and keep a spare, already flashed.
  • Changing Wi-Fi on a Pi that is still online means SSH. While the Pi can still reach its old network, switching it means SSH in and sudo nmtui on the Pi. A Pi that can reach no network at all, for example one moved to a new site, is easier: Anthias raises its own "Anthias Setup" Wi-Fi network and shows the password and a QR code on screen; join it, then pick the real network at http://192.168.42.1:8000.
  • No one sees a dead screen. Anthias sends no offline alerts, and each Pi is managed on its own. Someone has to walk past the TV to notice.
  • Heat behind a TV. A bare board in a closed space throttles. Use a vented case.

Where Brix fits

Brix does not run on a Raspberry Pi. It has no Pi app, and opening the Brix player in a Pi's browser is a trial, not an install: no TV on and off, no screenshots, and anyone can close the tab.

If you want to stop maintaining Pis, plug a $99.99 Amazon Signage Stick into the TV instead. It has its own storage, a power supply in the box, and Brix can take screenshots, restart it and turn the TV on and off from the CMS. Pairing a Stick with Brix takes a median of 2.6 minutes across the Signage Sticks running Brix. See the Raspberry Pi vs Amazon Signage Stick comparison.

Brix costs $6 per screen per month billed annually, or $8 billed monthly. It is not free. For one or two screens and no budget, Anthias or Yodeck Free on a Pi is the better choice. If you are moving from another platform, we move your content, playlists and screens for you, free, usually in a day.

Start a free 7-day Brix trial. No card needed.

Try Brix free for 7 days

$6 per screen per month billed annually ($8 month to month). No card needed.

Start free trial