Blog / Buyer's Guides / Single Sign-On for Digital Signage: A Buyer's Guide

Single Sign-On for Digital Signage: A Buyer's Guide

How single sign-on works for digital signage: SAML vs OIDC, SCIM, roles by location from your identity provider, which plan each vendor puts SSO on.

Buyer's Guides
On this page
  1. What does SSO do for a signage team?
  2. SAML or OpenID Connect: which does signage use?
  3. What is SCIM, and do you need it?
  4. How does SSO give each person the right locations?
  5. Which plan includes SSO?
  6. What should you ask a signage vendor about SSO?
  7. Single sign-on in Brix

ScreenCloud, Yodeck, OptiSigns and Rise Vision all support single sign-on (SSO) and user roles. Most put it on a higher plan, and all four use SAML. ScreenCloud includes it on Enterprise, or on Pro from 35 licences. Brix supports SSO through OpenID Connect (OIDC) on its one plan. Its built-in and custom roles can scope to a single location. Brix does not support SAML.

Check three things before you shortlist a vendor:

  • Does it speak SAML or OpenID Connect?
  • Can a role scope to one store, not just the whole account?
  • Does it push changes over SCIM as they happen?

Good SSO also sets each person's role and location from your directory. Nobody has to invite store managers by hand.

What does SSO do for a signage team?

  • No separate passwords. Everyone uses the password, passkey and two-factor rules your IT team already enforces.
  • Leavers lose access. Switch someone off in your identity provider and they cannot sign in to the signage software.
  • No invites. With just-in-time (JIT) provisioning, a new person gets an account at their first sign-in.
  • Access that follows your HR data. With role mapping, the platform reads a person's group, job title or store number and gives them the right role at the right location.
  • An easier security review. "Access is controlled through our identity provider" is the answer most IT teams want.
  • No shared store logins. Every sign-in is a real person in your directory.

SAML or OpenID Connect: which does signage use?

Both are standards for SSO. Your identity provider signs a statement that says who the person is, and the signage software trusts it.

  • SAML 2.0 is the older, XML-based standard. It is common in enterprise software and supported by every major identity provider, including on-premises Active Directory Federation Services (ADFS).
  • OpenID Connect (OIDC) is the newer standard, built on OAuth 2.0 and JSON. Entra ID, Okta, Google Workspace, Auth0, OneLogin and Ping all support it.

For most teams the choice does not matter: your identity provider speaks both. It matters only if your provider or your policy allows only one of them. Ask IT which one they prefer before you shortlist vendors. Most signage vendors support SAML; a few support OIDC.

What is SCIM, and do you need it?

SSO checks a person only when they sign in. SCIM (System for Cross-domain Identity Management) lets your identity provider push changes to the signage platform as they happen:

  • Leavers are signed out at once. Without SCIM, a session someone already has lasts until it expires, even after you switch them off.
  • Moves apply straight away. A move to a new store changes their access now, not at their next sign-in.
  • New starters are ready before day one, with their role and location, so you can pick them as approvers ahead of time.

Most small teams do not need it: JIT provisioning at sign-in covers them. Ask for SCIM if you have high turnover across many locations, or a compliance rule that access must end immediately.

How does SSO give each person the right locations?

With rules that turn directory data into access, so access follows your HR data and nobody raises a help-desk ticket to get the right stores. Your identity provider already knows each person's groups, job title, store number and region. The signage platform reads those values (called claims in OIDC, attributes in SAML) at sign-in and applies rules such as:

WhoRuleWhat they get
Global admingroup is signage-adminsAdmin across every location
Regional managertitle is Regional ManagerContent editor for their region and every store in it
Store managertitle is Store ManagerContent editor at their own store only

For this to work, each location in the signage platform needs an ID that matches the value in your directory, such as a store number. Ask vendors whether their mapping can place a person at a location, or only give a workspace-wide role. Some map groups to roles but cannot place a person at a single store. See digital signage user permissions by location.

Which plan includes SSO?

From each vendor's pricing page and help center. Prices are per screen per month.

VendorPlan with SSOStandardSCIMPrice
OptiSignsPro PlusSAML, groups mapped to teams and rolesNot documented (JIT at sign-in)$13.50 annual, $15 monthly
KitcastProSAML and OIDC; help center calls SSO a paid extra set up by supportEntra ID, Google Workspace$10 annual, $14 monthly
YodeckEnterpriseSAML, groups mapped to roles per workspaceOkta, Entra ID, OneLogin$16
Rise VisionEnterpriseSAMLNot documented$15 annual ($180 per display per year)
NoviSignPremiumSAMLNot documented$25 annual, $28 monthly
FugoEnterpriseSAML and OIDCNot documented$40 annual
ScreenlyEnterpriseSAMLNot documentedQuote, from 25 screens
ScreenCloudEnterprise, or Pro (included from 35 licences, a paid add-on below that)SAMLOkta, Entra ID (Enterprise)Quote
SpectrioEnterprise packageSAMLNot documentedQuote

Many of these vendors also let people sign in with a Google or Microsoft button on lower plans. That is convenient, but it is not the same as SSO: people can usually still sign in with a password instead, and roles do not come from your directory.

What should you ask a signage vendor about SSO?

SSO problems rarely show up in a demo. They show up when IT tries to connect. Ask:

  1. Which plan includes SSO? Is there a minimum screen count or an extra fee?
  2. SAML, OIDC or both? Is our identity provider on your list?
  3. Can we set it up ourselves, or does it need a support ticket?
  4. Can we test the connection before we require SSO for everyone?
  5. Can rules place a person at a region or store from our directory data, or only give a workspace-wide role?
  6. Can we see what access a person will get before they sign in?
  7. Which providers support SCIM, and on which plan?
  8. How long does a session last, and what happens to it when we switch someone off?
  9. If our identity provider is down, how does an owner still get in?

For the wider buying checklist, see questions to ask a digital signage vendor. If procurement needs a formal document, start from a digital signage RFP template and add these SSO questions to it. For the rest of IT's review (encryption, logging, recovery, contract terms), see the digital signage security questionnaire guide.

Single sign-on in Brix

Brix includes SSO and SCIM on its one plan: $6 per screen per month billed annually, or $8 billed monthly, with no minimum screen count. Every field is in the single sign-on setup guide.

  • Setup: Connect the identity provider yourself under Settings > Security. Add the connection, prove each email domain with a DNS TXT record, run a test sign-in, then add access rules. No sales call, no back-and-forth, and no extra fee.
  • Standard: OpenID Connect only. It works with Microsoft Entra ID, Google Workspace, Okta, Auth0 and any other OIDC provider. Brix does not support SAML: if your provider offers only SAML, ask IT whether an OIDC app is available.
  • Access rules: a rule reads a claim such as title, groups or department and gives a role at the person's own location (from a claim such as storeNumber or region), across the whole workspace, or at one place you choose. The role can be a built-in role or a custom role you built for your organization. See organization, people and roles for how roles and locations work together. A regional manager whose claim says WEST gets the West region and every store in it. If no rule matches, you choose a default role or refuse the sign-in. Access you give by hand is never changed by a sign-in.
Access rules for an SSO connection: a location claim, three rules and a default role
Access rules for an SSO connection: a location claim, three rules and a default role
  • Check the rules: paste the claims for one person, or reuse the last real sign-in, and see exactly which role they would get and where before you save. It also names any store number that matches no location.
Check the rules: the claims for one person and the access they would get
Check the rules: the claims for one person and the access they would get
  • SCIM: works with Okta and Microsoft Entra ID. Without SCIM, a session lasts up to 30 days or until you remove the person by hand.

If your IT team requires SAML, or a SOC 2 report, Brix is not the right fit. Start a free 7-day trial to set up SSO in your own account, no card needed.

Try Brix free for 7 days

$6 per screen per month billed annually ($8 month to month). No card needed.

Start free trial